Landscape Lighting Installation Cost in Dallas, TX (2026)

Landscape Lighting Installation in Dallas, TX costs $1,043–$3,578 in 2026, with most homeowners paying around $2,311. That’s about 3% below the national average (BLS cost index: 0.97). Licensed electricians in the Dallas-Fort Worth-Arlington metro charge $65–$110/hour. Typically takes 30-60 minutes per fixture

Updated April 2026Based on public BLS & industry data

Estimated Cost

$1,043–$3,578

Mid-range estimate for 10 fixture in Dallas, TX. Labor: $65–$110/hr.

LED landscape fixture: $20–$80/each
Low-voltage transformer: $60–$250/each
12/2 landscape wire: $30–$80/roll
Wire connectors & stakes: $15–$40/lot
Timer/photocell controller: $20–$60/each

Calculate Your Cost

Number of fixtures

4–30 fixture

Material Grade

Additional Factors

Trenching through hardscape(+$100–$400)

Tree uplighting (high fixtures)(+$50–$150)

Factors That Affect Cost

1Number and type of fixtures
2Transformer size and features
3Wire run length and trenching needs
4Landscape complexity (hardscape, slopes)
5Smart controls and dimming capability

Design tips

Layer your lighting with path lights for safety, spot lights for focal points, and wash lights for walls and fences. Avoid over-lighting; subtle, warm (2700K) LEDs look best.

Low-voltage advantages

12V landscape lighting is safe to touch, doesn't require conduit or permits, and uses minimal electricity. A 300W transformer can power 30+ LED fixtures for pennies a night.

How We Calculate These Numbers

Our cost estimates are built from publicly available data including the Bureau of Labor Statistics (BLS) Occupational Employment & Wage Statistics, HomeGuide, Thumbtack, and Fixr cost databases. Material prices reflect national averages from major retailers, cross-referenced across 3+ sources for accuracy.

For Dallas, we apply a regional cost-of-living multiplier of 0.97 (3% below the national average) based on BLS regional data. Labor rates reflect the local Dallas metro market as of 2026.

QuotrPro Pricing Research Team

AI-powered estimating platform used by contractors across the US. Data reviewed quarterly against BLS and industry benchmarks.

These are estimates for planning purposes. Actual costs vary by project scope, contractor, and market conditions. Always get 2–3 quotes from licensed professionals.

Frequently Asked Questions

Low-voltage or line-voltage?

Low-voltage (12V) is safer, easier to install, and doesn't require a permit. Line-voltage (120V) is needed for large commercial fixtures but is overkill for most homes.

What size transformer do I need?

Add up the wattage of all fixtures and buy a transformer rated at 20% above that total. For 10 LED fixtures at 5W each, a 60W transformer works well.

How long do LED landscape lights last?

Quality LED landscape fixtures last 40,000-50,000 hours, or roughly 15-20 years of nightly use.

Can I add lights to an existing system?

Yes, as long as your transformer has capacity. Calculate total fixture wattage to ensure it doesn't exceed 80% of transformer rating.