Bathroom Plumbing Rough-In Cost in Dallas, TX (2026)

Bathroom Plumbing Rough-In in Dallas, TX costs $1,236–$4,900 in 2026, with most homeowners paying around $3,068. That’s about 3% below the national average (BLS cost index: 0.97). Licensed plumbers in the Dallas-Fort Worth-Arlington metro charge $60–$105/hour. 2-3 days depending on layout complexity and slab vs. framed floor. Dallas typically requires permits for this work, running $100–$400.

Updated April 2026Based on public BLS & industry data

Estimated Cost

$1,236–$4,900

Mid-range estimate for 1 bathroom in Dallas, TX. Labor: $60–$105/hr.

PVC/ABS drain pipe & fittings: $200–$500/set
PEX or copper supply lines: $120–$350/set
Vent pipe & fittings: $60–$180/set
Shut-off valves (3-4): $30–$100/set
P-traps & cleanouts: $20–$50/set

Calculate Your Cost

Number of bathrooms

1–3 bathroom

Material Grade

Additional Factors

Concrete slab cutting(+$500–$1,500)

Second-floor installation (longer runs)(+$300–$800)

Factors That Affect Cost

1Number of fixtures (half vs. full bath)
2Distance from existing stack
3Floor type (slab vs. wood frame)
4Local code requirements
5Second-floor complexity

Permit Note

City of Dallas requires permits for electrical, plumbing, mechanical, and structural work. Fees are calculated on project value, typically $50–$300. Online applications are available.

Planning the Layout

Keep the new bathroom as close to existing plumbing as possible to minimize pipe runs and cost. Back-to-back bathrooms sharing a wet wall is the most economical layout.

Code Considerations

Every fixture needs a properly sized trap and vent. The toilet requires a 3-inch drain minimum. Supply lines must have accessible shut-off valves.

How We Calculate These Numbers

Our cost estimates are built from publicly available data including the Bureau of Labor Statistics (BLS) Occupational Employment & Wage Statistics, HomeGuide, Thumbtack, and Fixr cost databases. Material prices reflect national averages from major retailers, cross-referenced across 3+ sources for accuracy.

For Dallas, we apply a regional cost-of-living multiplier of 0.97 (3% below the national average) based on BLS regional data. Labor rates reflect the local Dallas metro market as of 2026.

QuotrPro Pricing Research Team

AI-powered estimating platform used by contractors across the US. Data reviewed quarterly against BLS and industry benchmarks.

These are estimates for planning purposes. Actual costs vary by project scope, contractor, and market conditions. Always get 2–3 quotes from licensed professionals.